HEBEI REKING WIRE MESH CO.,LTD
Screen Printing Mesh & Filter Mesh With Stainless Steel ,Polyester and Nylon Material.Screen Printing Material
Payment & Shipping Terms:
|Features:||Acid Resistance||Standing Temperature:||70 To 260|
|Product Name:||2 Mm*2 Mm High Quality Teflen Fiberglass Mesh Conveyor Belt For Cardboard Division||Width:||50-150|
|Length:||Any Length Is OK||Hole Size:||2mm|
|Thickness:||1.4mm||Packing:||Roll Packed In A Carton Box|
2 mm*2 mm High Quality teflen Fiberglass Mesh Conveyor Belt For Cardboard Division
Description of the teflen conveyor belt:
teflen mesh conveyor belt is coated with teflen resin on the basis of glass fiber mesh to form teflen mesh conveyor belt; teflen mesh conveyor belt mainly defines the size of mesh size, mainly 1×1MM, 2×2MM, 4×4MM, 10×10MM and other meshes, and are divided into single-latitude teflen mesh belt and double-latitude teflen mesh belt according to different warp and weft.
All teflen conveyor belts must be ringed for practical use, so the teflen conveyor belt joint is a critical preparation step. The quality of the joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly.
1, the method of the joint
2. teflen conveyor belt joints
3. Joints of PVC and PVG whole core flame retardant conveyor belts
4. teflen conveyor belt joints
Features of the teflen conveyor belt:
1. Flame retardant.
2. teflen has weather resistance and aging resistance. Through practical application, such as continuous placement at a high temperature of 250 ° C for 200 days, not only the low strength will not change, but also the weight is not reduced; placed at a high temperature of 350 ° C, 120 hours, the weight is only reduced by about 0.6%; at 180 The original softness can be maintained at a low temperature of °C.
3. teflen conveyor belt has good dimensional stability (elongation coefficient less than 5‰) and high strength. Good mechanical properties.
4. Breathability - The gas permeability of the conveyor belt reduces heat source consumption and improves drying efficiency.
5. The teflen conveyor belt is non-tacky: it does not easily adhere to any material. Easy to clean all kinds of grease, stains or other fixtures attached to the surface; almost all adhesives such as pastes, resins, paints, etc. can be removed;
6. Anti-bending fatigue can be used for smaller wheel diameters.
Specification of the teflen conveyor belt:
|Item||Hole size||Material||Thickness||weight||Temperature resistance||Maximum width||Tensile strength|
|W-O5J||1x 1mm||Glass fiber||0.5mm||370g /m 2||-70 -260 ℃||4m||310/290 N/cm|
|W-07J||2x 2mm||Glass fiber||0.7mm||450g /m 2||-70 -260 ℃||4m||350/310 N/cm|
|W-1J||4x 4mm||Glass fiber||1.0mm||400g /m 2||-70 -260 ℃||4m||390/320 N/cm|
|W-2J||4x 4mm||Glass fiber||1.0mm||450g /m 2||-70 -260 ℃||4m||390/320 N/cm|
|W-12KJ||4x 4mm||Glass fiber||1.2mm||600g /m 2||-70 -260 ℃||4m||895/370 N/cm|
|W-3J||4x 4mm||Glass fiber||1.0mm||500g /m 2||-70 -260 ℃||4m||395/370 N/cm|
|W-4J||4x 4mm||Glass fiber||1.0mm||500g /m 2||-70 -260 ℃||4m||900/600 N/cm|
|W-5J||4x 4mm||Glass fiber||1.0mm||550g /m 2||-70 -260 ℃||4m||395/370 N/cm|
|W-12J||10x 10mm||Glass fiber||1.2mm||450g /m 2||-70 -260 ℃||4m||360/300 N/cm|
|NW-14J||0.5x 1mm||Glass fiber||0.5mm||420g /m 2||-70 -260 ℃||4m||310/290 N/cm|
|W-09J||2x 2.5mm||Glass fiber||0.9mm||600g /m 2||-70 -260 ℃||3m||390/320 N/cm|
Application of the teflen conveyor belt:
Contact Person: Ivy Wong