PU Squeegee For Silk Screen Printing Mesh Squeegee Rubber 9 MM Thickness
Squeegee, is a process used in the screen printing tape, also known as plastic scratch.
Most of them are made of PU material or natural rubber. Depending on the characteristics of the screen printing substrate, the precision of the printing pattern and the printing method, squeegees with different hardness and different cross-sectional shapes can be selected.
Squeegee features:
High abrasion resistant
Super solvent resistant
Scratch resistant
High tolerance to UV systems
High cut resistant
size customization
Cut customization
Squeegee standard size:
Thickness: 2mm to 20mm
Wide: 9mm to 500 mm
Special size we can accept OEM.
Description for the screen printing squeegee:
Soft screen printing squeegee (65 degrees) can be printed with thicker ink layer and higher covering rate. Hard squeegee (85 degrees) can be printed in a thin layer of ink, which is suitable for UV ink printing in extremely fine fonts and lines. Try to avoid the stencil and excessive pressure on the screen, this will lead to ink layer thick, difficult to control, excessive wear screen, so the right way is to make the ends of the stencil and screen edge with the proper distance, and then use the appropriate printing pressure. Do not overpressure or use too thick size to squeeze in the glue to hold the squeegee, it should be used regularly for rest rather than continuous use.
Youli brand screen printing squeegee can be formulated for a variety of solvents most suitable formula to achieve ultra-wear, long life, low expansion rate of the characteristics, and has a variety of shapes of plastic scraper to meet different printing needs.
Screen printing squeegee accord with the international standard,it be produced by four color,red,green,blue,and white color.Different color have differ hardness. you could distinguish the hardness by itself color when you buy them.
Specification For The Sceen Printing Squeegee:
| Soft |
50 to 65 Shore A |
Red or natural color |
| Medium |
70 to 75 Shore A |
Green Color |
| Hard |
80 to 85 Shore A |
Blue color |
| Super Hard |
90 to 95 Shore A |
White color |
| Triple medium |
75 , 90 , 75 Shore A |
Green , White , Green |
| Soft Triple medium |
65 , 90 , 65 Shore A |
Red , White , Red |
Squeegee clean:
Firstly use cloth to wipe superfluous ink ,then use soft cloth to be touched with appropriate solvent cleaning, don't use strong solvent,especially ink thinner to clean glue scrape. After grinding or reusing,the glue should be scraped enought to completely evaporate the solvent.
Photos For The Screen Printing Squeegee:
Your message must be between 20-3,000 characters!
