High Tension Stainless Steel Wire Mesh 304 / 316L Material Screen Printing Mesh Silver
Description of stainless steel wire mesh:
As a result of stainless steel with acid , alkaline , wear-resistance , heat-resistance properties , commonly used in acid , alkali environment screening mesh and filtration filter , for a slurry net petroleum industry , chemical fiber industry , electroplating industry for picking net , industry and the construction industry , filtet sand , filting liquid and gas , aerospace , petrochemical , chemical and other industries . It can also be used for mechaincal attachment security etc., also to replace the wooden walls and ceilings made.
The most basic and important characteristic parameters of stainless steel mesh are line diameter (d) and mesh width (W) as shown in the figure. Other parameters are basically derived from them.
| material |
SUS304N,304HP,316,316L,304L |
| weave type |
plain weave |
| size per roll |
usually 30 or 50 meter per roll |
| wire diameter |
0.018-0.02mm |
| aperture size |
41-268micron |
| hole shape |
square hole |
Features of stainless steel wire mesh:
- High tension.Much higher than common polyester mesh,and this property is very stable
- Super Precision.Uniform wire diameter and aperture with extremely low difference
- Low Elongation.Very small elongation of wire mesh at high tension
- High Flexbility.The wire mesh will not lose elasticity at extreme tension
- High Corrosion Resistance.the excellent corrosion resistance of stainless steel wire exceeds polyester fiber
- Non-electrostatic.To avoid affects of nonelectrostatic for printing and ensure the safety of printing
- Good Heat-melting Resistance.Special features of steel wire mesh.Suitable for heat-melting ink
- Good Solvent Resistance.To avoid the affects of any solvents to wire mesh and to ensure the safety of printing
Application of stainless steel wire mesh:
Stainless steel screen printing is suitable for direct platemaking, surface is surface substrate, such as: glass, ceramics, metal, plastic, rubber, printing circuit, etc.Especially suitable for use in harsh environments, multicolor overprinter, mass printing, step printing, precision printing.Due to the small size of wire mesh, high mesh can be woven, and the strength and elastic modulus of large, good plane stability.However, the wire mesh is rigid, easy to generate indentation when impacted, poor resilience is not suitable for restoration, and it is not suitable for printing substrate with poor flatness.
Specification of stainless steel wire mesh:
| Mesh/inch |
Wire diameter (inch) |
Aperture (inch) |
Open area |
Weight (Sqaure meter) |
| 1*1 |
0.080 |
0.920 |
92.0 |
2.0 |
| 2*2 |
0.063 |
0.437 |
87.4 |
2.5 |
| 3*3 |
0.054 |
0.279 |
83.8 |
2.7 |
| 4*4 |
0.047 |
0.203 |
81.2 |
2.7 |
| 5*5 |
0.041 |
0.159 |
79.5 |
2.6 |
| 10*10 |
0.024 |
0.076 |
74.9 |
1.8 |
| 12*12 |
0.020 |
0.064 |
75.9 |
1.5 |
| 14*14 |
0.020 |
0.052 |
71.9 |
1.75 |
| 16*16 |
0.018 |
0.045 |
71.2 |
1.6 |
| 18*18 |
0.016 |
0.0398 |
69.4 |
1.4 |
| 20*20 |
0.009 |
0.041 |
76.0 |
0.57 |
| 30*30 |
0.012 |
0.0382 |
63.9 |
1.35 |
| 40*40 |
0.0098 |
0.015 |
72.1 |
1.25 |
| 50*50 |
0.0079 |
0.0121 |
36.7 |
1.0 |
| 60*60 |
0.0047 |
0.012 |
38.7 |
0.42 |
| 80*80 |
0.0047 |
0.0107 |
45.5 |
0.58 |
| 100*100 |
0.0039 |
0.006 |
59.8 |
0.50 |
| 120*120 |
0.0027 |
0.0056 |
67.7 |
0.29 |
| 150*150 |
0.0024 |
0.0043 |
41.6 |
0.27 |
| 165*165 |
0.0018 |
0.0043 |
50 |
0.167 |
| 180*180 |
0.0019 |
0.0036 |
64.5 |
0.22 |
| 200*200 |
0.0019 |
0.003 |
60.6 |
0.24 |
| 250*250 |
0.0012 |
0.0028 |
49.8 |
0.11 |
| 270*270 |
0.0014 |
0.0023 |
60 |
0.16 |
| 300*300 |
0.0012 |
0.0022 |
57 |
0.13 |
| 325*325 |
0.0014 |
0.0017 |
55.3 |
.0.20 |
| 400*400 |
0.0012 |
0.0013 |
52.7 |
0.18 |
| 500*500 |
0.0009 |
0.001 |
50.7 |
0.15 |
| 635*635 |
0.0007 |
0.0008 |
55.0 |
0.10 |
Your message must be between 20-3,000 characters!
